5
Insert a telephone line cord into the bottom of
each radio module.
6
Slide the telephone line cords through the rear
exit slots on the bottom of the carrier. Cords
originating from slots 1 and 6 can share exit slots
with cords from slots 2 and 5 respectively.
7
Insert the free end of the telephone line cord
into the appropriate extension jack or terminal/
station connector on your communications system
switch/control unit (refer to your communications
system manual for the proper location).
8
Insert the carrier’s power cord into the left side
of the carrier.
Installing the MDW 9010
2-15
