3
Reverse the mounting base (so the wide end of
the mounting base is above the narrow end of
the battery charger). Insert the tab on the narrow end
of the mounting base into the slot on the wide end of
the battery charger. Insert the tab on the wide end of
the mounting base into the slot on the narrow end of
the battery charger, pushing the mount-ing base
down and slightly inward until the tabs lock into place.
4
Insert the battery charger’s power cord/AC
adapter through the hole in the bottom of the
wide end of the mounting base.
5
Insert the power cord/AC adapter into the
battery charger plug marked Power. Route the
power cord/AC adapter into the channel marked
Desk or Wall.
Wall Mounting Only
If desk mounting, place the battery charger on the
desk, then go to Step 9. If wall mounting, continue
with Step 6.
6
Reverse the handset hook on the battery
charger. Slide the handset hook up out of its
slot. Then turn the hook upside down and replace it
in the slot with the top protruding so the handset can
hang from it.
Wall Mounting Only
Installing the MDW 9010
2-27
