MDW 9010 Compatibility
6
Programming and
Call Handling Instructions
After you have installed your MDW 9010 phone and understand the controls and displays,
use the programming and call handling instructions that come with your communications
system; follow the user instructions for the phone type identified below:
For this communications system...
Use the instructions for a...
PARTNER®
MDW 9000 phone.
MERLIN®, MERLIN Plus, and MERLIN II
5-button phone.
MERLIN LEGEND®
10-button ATL set.
System 25
10-button ATL set.
System 75, System 85, and DEFINITY®*
7303s set.
NOTE:
The MDW 9010 phone is fully compatible with the PARTNER family of communication
systems. For the remaining communications systems, however, you must carefully
note the functional differences between your wireless phone and the phone type
identified in the table, as described on the following pages.
Entering Station Programming Mode
On all PARTNER, MERLIN, and MERLIN LEGEND systems:
■
■
To enter programming mode, turn on the handset, press [
Intercom
], then press [
Feat
]
followed by [
0
] [
0
].
To exit programming mode, press [
Feat
] followed by [
0
] [
0
] or turn off the handset.
NOTE:
The above instructions do not apply on System 25, System 75, System 85, and
DEFINITY systems, because features are assigned by the system administrator.
* For DEFINITY G3V3 systems, you can administer the system for the MDW 9000 telephone (rather than a
7303s set) and follow the user’s instructions in the MDW 9000 Wireless Telephone User’s Guide, order
number 555-230-768.
MDW 9010 Compatibility
6-1
