Asus Z8NH-D12 Manual Download Page 146

Page: 146 / 178

6-12

Chapter 6: Driver installation

11. Scroll down to locate the driver and press <Enter> to continue.

Back

Select Device Driver to Load

Please select the driver below which you wish to load. If

it does not appear and you have a driver disk, press F2.
LSI Logic Fusion MPT SPI Driver (mptspi)

LSI MegaRAID Controllers (megaraid_mbox)

LSI MegaRAID Controllers (megaraid_sas)

LSI megasr Driver ver 13.10.0708.2009 (megasr)

Marvell SATA controllers (sata_mv)

Mylex DAC960 RAID Controller (DAC960)

[] Specify optional module arguments

The driver version may vary with time and model. Select LSI Mega Software
RAID driver (

LSI megasr Driver

) all the time.

12. Select

Skip

and press <Enter> to continue.

CD Found

To begin testing the CD media before

installation press OK.
Choose Skip to skip the media test

and start the installation.

Skip

Summary of Contents for Z8NH-D12



















































































































































































Search results

Summary of Contents for Z8NH-D12

Reviews:

Asus Z8NH-D12, Manual, Page: 146 / 178

Search results

Summary of Contents for Z8NH-D12

Reviews: