Asus TS700-E8-PS4 User Manual Download Page 37

Page: 37 / 210

2-13

ASUS TS700-E8-PS4, TS700-E8-RS8

2.4

Front panel assembly

Before you can install a 5.25-inch drive, you should first remove the front panel assembly (front

bezel and front panel cover).

2.4.1

Removing the front panel assembly

To remove the front panel assembly

Locate the three hooked tabs on the chassis side

rail.

Shift the hooked tabs and take off the front bezel.

2.4.2

Reinstalling the front panel assembly

To reinstall the front panel assembly:

Hook the other side of the front panel

assembly to the chassis.

Swing the front panel assembly and

snap it back into place.

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands