Asus TS700-E8-PS4 User Manual Download Page 202

Page: 202 / 210

7-18

Chapter 7: Driver installation

7.4.2

Installing a driver or utility

This section describes the steps on how to install a particular driver or utility from the support DVD.
To install a driver or utility:

Restart the computer, and then log on with Administrator privileges.

Insert the motherboard/system support DVD into the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

From the

Drivers

tab, select the driver that you want to install.

6. Click

to complete the installation.

list of available drivers for your system

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands