Asus TS700-E8-PS4 User Manual Download Page 38

Page: 38 / 210

Chapter 2: Hardware setup

2-14

2.5

SATA/SAS hard disk drives

The system comes with two sets of hard disk drive modules. TS700-E8-PS4 supports the first

set as default. TS700-E8-RS8 supports both sets. Each hard disk drive module, including

externally removable trays for mounting four hot-swap SATA/SAS hard disk drives, allows

you to access the drive trays by simply opening the front bezel.

An HDD module cage comes with a SATA or SAS backplane. Take note of the type of HDD

module cage you purchase before buying hard disks.

2.5.1

Removing the HDD module cage

Disconnect all the cables from the SATA/SAS backplane on the HDD module cage.

Level the HDD module cage latch counterclockwise. The HDD module cage will be

pushed out of the chassis.

Remove the HDD module cage.

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands