Asus TS700-E8-PS4 User Manual Download Page 43

Page: 43 / 210

2-19

ASUS TS700-E8-PS4, TS700-E8-RS8

Orient and place the SSD into the tray.

Ensure that the SSD is fitted firmly

inside the drive tray and that the four

screws of the SSD matches the four

screws holes of the drive tray.

When installed, the SATA/SAS connector on the drive connects to the SATA/

SAS interface on the backplane.

Repeat steps 1 to 8 to install other 2.5-inch hard disk drives.

Carefully insert the drive tray with its

case facing downwards and push it

all the way to the drive bay.

Lock the secure tab to secure the

drive tray in place.

When the drive tray assembly is properly installed, you will see the edge of the drive tray is

in align with the chassis cover.

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands