Asus TS700-E8-PS4 User Manual Download Page 88

Page: 88 / 210

Chapter 4: Motherboard information

4-28

17. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

•

If you want to connect a high-definition front panel audio module to this connector, set

the

Front Panel Type

item in the BIOS setup to

[HD];

if you want to connect an AC'97

front panel audio module to this connector, set the item to

[AC97]

. By default, this

connector is set to

[HD]

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands