Asus TS700-E8-PS4 User Manual Download Page 33

Page: 33 / 210

2-9

ASUS TS700-E8-PS4, TS700-E8-RS8

2.2.2

Installing the CPU heatsink

To install the CPU heatsink:

Place the CPU heatsink and fan on top of the installed CPU, ensuring that the four

screws match the holes on the support plate, and the arrow on the fan faces the rear

panel of the server chassis.

Twist each of the four screws with a Philips (cross) screwdriver just enough to attach

the CPU heatsink and fan to the motherboard. When the four screws are attached,

tighten them one by one to completely secure the CPU heatsink and fan.

Tighten the four heatsink screws in a diagonal sequence.

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands

Asus TS700-E8-PS4, User Manual

Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Related manuals for TS700-E8-PS4

Brands by name

Popular brands