Asus TS700-E8-PS4 User Manual Download Page 117

Page: 117 / 210

5-29

ASUS TS700-E8-PS4, TS700-E8-RS8

5.6.1

Processor Configuration

Per Socket Configuration

Allows you to set the number of cores to enable. 0 means all cores.

Hyper Threading [Enabled]

Allows you to enable or disable the Intel

Hyper-Threading Technology function. When

disabled, only one thread per activated core is enabled.

Configuration options: [Disabled] [Enabled]

Execute Disable Bit [Enabled]

When disabled, forces the XD feature flag to always return 0.

Configuration options: [Disabled] [Enabled]

Enable Intel TXT Support [Disabled]

This item enables Intel Trusted Execution Technology Configuration.
Configuration options: [Disabled] [Enabled]

Disable EV DFS Features when TXT is enabled.

VMX [Enabled]

Enables the Vanderpool Technology. Takes effect after reboot.
Configuration options: [Disabled] [Enabled]

Summary of Contents for TS700-E8-PS4



















































































































































































































Search results

Summary of Contents for TS700-E8-PS4

Reviews:

Asus TS700-E8-PS4, User Manual, Page: 117 / 210

Search results

Summary of Contents for TS700-E8-PS4

Reviews: