manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 88 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 88

5-4

Chapter 5: BIOS Setup

5.1.3 

BUPDATER utility

The succeeding BIOS screens are for reference only. The actual BIOS screen displays 

may not be the same as shown.

The BUPDATER utility allows you to update the BIOS file in the DOS environment using a 

bootable USB flash disk drive with the updated BIOS file.

Updating the BIOS file

To update the BIOS file using the BUPDATER utility:

1. 

Visit the ASUS website at www.asus.com and download the latest BIOS file for the 

motherboard. Save the BIOS file to a bootable USB flash disk drive.

2. 

Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at 

support.asus.com to the bootable USB flash disk drive you created earlier.

3. 

Boot the system in DOS mode, then at the prompt, type:

 

BUPDATER /i[filename].CAP

where [filename] is the latest or the original BIOS file on the bootable USB flash disk 

drive, then press <Enter>.

A:\>BUPDATER /i[file name].CAP

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments