manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 149 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 149

ASUS TS300-E9-PS4

7-3

3. Click 

Load Driver

.

4. 

A message appears, reminding you to insert the installation media containing the driver 

of the RAID controller driver. If you have only one optical drive installed in your system, 

eject the Windows OS installation disc and replace with the motherboard Support DVD 

into the optical drive. Click 

Browse

 to continue.

5. 

Locate the driver in the corresponding folder of the Support DVD then click 

OK

 to 

continue.

6. 

Select the RAID controller driver you need from the list and click 

Next

.

7. 

When the system finishes loading the RAID driver, replace the motherboard Support 

DVD with the Windows Server installation disc. Select the drive to install Windows and 

click 

Next

.

8. 

Setup then proceeds with the OS installation. Follow screen instructions to continue.

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments