manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 148 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 148

7-2

Chapter 7: Driver Installation

7.1.2 

Installing the RAID controller driver

During Windows

®

 Server 2008 R2 OS installation

To install the RAID controller driver when installing Windows

®

 Server 2008 R2 OS

1. 

Boot the computer using the Windows

®

 Server 2008 R2 OS installation disc. Follow the 

screen instructions to start installing Windows Server 2008 R2.

2. 

When prompted to choose a type of installation, click 

Custom (advanced)

.

7.1 

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install an 

operating system to the independent hard disk drive or bootable array. This part provides the 

instructions on how to install the RAID controller drivers during OS installation.

7.1.1 

Creating a USB flash drive with RAID driver

When installing Windows

®

 Server OS, you can load the RAID driver from a USB flash drive. 

You can create a USB flash drive with RAID driver in Windows by copying the files from the 

support DVD to the USB flash drive. 
To copy the RAID driver to a USB flash drive in Windows environment:

1. 

Place the motherboard support DVD in the optical drive.

2. 

Connect a USB flash drive to your system.

3.   Click on the optical drive to browse the contents of the support DVD.

4. Click 

Drivers 

>

 C23x INTEL RAID

 > 

Driver

 > 

Windows

 and then copy the

 SATA_RAID 

driver folder to the USB flash drive.

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments