manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 156 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 156

7-10

Chapter 7: Driver Installation

5. Click 

Install Drivers and Software

 option to begin installation.

7.5 

Installing the Intel

®

 I210 Gigabit Adapters driver

This section provides the instructions on how to install the 

Intel

®

 I210 Gigabits Adapter 

Driver 

on the system.

To install the 

Intel

®

 I210 Gigabit Adapters Driver

 on the Windows

®

 operating system:

1. 

Restart the computer.

2. 

Log on with 

Administrator

 privileges.

3. 

Insert the motherboard/system support DVD to the optical drive.

4. Click 

Intel

®

 I210 Gigabit Adapters Drivers

 in the 

Drivers

 menu of the main screen to 

start the installation.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

ASSETUP.EXE

 from the 

BIN

 folder. Double-click the 

ASSETUP.EXE

 to run 

the support DVD.

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments