manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 140 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 140

6-12

Chapter 6: RAID Configuration

6.3 

 Intel

®

 Rapid Storage Technology enterprise 

(Windows)

The Intel

®

 Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID 

10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the 

Serial ATA connectors supported by the Southbridge.

You can click 

Rescan

 to re-scan any attached hard disks.

1. 

Turn on the system to windows desktop.

2. 

Click the 

Intel

®

 Rapid Storage Technology enterprise

 icon to display the main menu.

Your storage system is configured for data protection, increased performance and optimal 

data storage capacity. You can create additional volumes to further optimize your storage 

system.

To enter the Intel

®

 Rapid Storage Technology enterprise utility under Windows operating 

system:

You need to manually install the Intel

®

 Rapid Storage Technology enterprise utility on a 

Windows

®

 operating system. Please refer to the installation instructions in 

Chapter 6

.

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments