manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 81 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 81

ASUS TS300-E9-PS4

4-23

16.  Auxiliary panel connector (20-2 pin AUX_PANEL1)

This connector is for additional front panel features including front panel SMB, locator 

LED and switch, chassis intrusion, and LAN LEDs.

1.  Front panel SMB (6-1 pin FPSMB)

These connectors connect the front panel SMBus cable.

2.  LAN activity LED (2-pin LAN1LINK and 2-pin LAN2LINK)

These connectors are for Gigabit LAN activity LEDs on the front panel.

3.  Locator LED (2-pin AUX_LOCLED1 and 2-pin AUX_LOCLED2) 

These connectors are for the Locator LED1 and LED2 on the front panel. Connect 

the Locator LED cables to these 2-pin connector. The LEDs will light up when the 

Locator button is pressed. 

4.  Locator Button/Switch (2-pin AUX_BMCLOCBTN)

These connectors are for the locator button on the front panel. This button queries 

the state of the system locator.

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments