manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 153 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 153

ASUS TS300-E9-PS4

7-7

7.4 

Installing the Intel

®

 Chipset device Software driver

4. Click 

Intel

®

 Chipset Device Software

 from the Drivers menu to start the installation.

This section provides the instructions on how to install the Intel

®

 chipset device software on 

the system. You need to manually install the Intel

®

 chipset device software on a Windows

®

 

Operating System. To install the Intel

®

 chipset device software on Windows

®

 Server 2008 R2:

1. 

Restart the computer.

2. 

Log in with 

Administrator

 privileges.

3. 

Insert the Motherboard Support DVD to the optical drive. 

 

The support DVD automatically displays the 

Drivers

 menu if Autorun is enabled in your 

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

ASSETUP.EXE

 from the 

BIN

 folder. Double-click the 

ASSETUP.EXE

 to run 

the support DVD.

5. The 

Intel(R) Chipset Device Software

 window appears. Click 

Next

 to start installation.

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments