manualshive.com logo in svg

Asus TS300-E9-PS4, User Manual, Page: 121 / 166

Share
Download
Asus TS300-E9-PS4 User Manual Download Page 121

5-37

ASUS TS300-E9-PS4

Boot Option Priorities

These items specify the boot device priority sequence from the available devices. The 

number of device items that appears on the screen depends on the number of devices 

installed in the system.

• 

To select the boot device during system startup, press <F8> when ASUS Logo 

appears.

• 

To access Windows OS in Safe Mode, please press <F8> after POST.

Boot Option #1–2 [IBA GE Slot 0600 v1556]

Configuration options: [IBA GE Slot 0600 v1566] [Disabled]

CD/DVD ROM Drive BBS Priorities

These items appear only when you connect SATA ODD or hard drive to the SATA ports and 

allow you to set the booting order of the SATA devices.

Network Device BBS Priorities

These items appear only when you connect SATA ODD or hard drive to the SATA ports and 

allow you to set the booting order of the SATA devices.

Hard Drive BBS Priorities

These items appear only when you connect SATA ODD or hard drive to the SATA ports and 

allow you to set the booting order of the SATA devices.

Summary of Contents for TS300-E9-PS4







































































































































































Reviews:

No comments