Asus RS720Q-E9-RS8 User Manual Download Page 122

Page: 122 / 154

Chapter 6: RAID Configuration

6-4

Go to the

Save & Exit

menu >

Save Changes and Reset

, or press <F10> to save and

reset.

Enter the BIOS Setup again during POST.

Go to the

Advanced

Intel(R) Virtual Raid on CPU

All Intel VMD

Controllers

then press <Enter> to display the Intel

Virtual Raid on CPU menu.

6.2.1

Creating a RAID set

To create a RAID set:

From the Intel

Virtual Raid on CPU menu, select

Create RAID Volume

and press

<Enter>. The following screen appears:

When the

Name

item is selected, enter a name for the RAID set and press <Enter>.

When the

RAID Level

item is selected, press <Enter> to select the RAID level to

create, and then press <Enter>.

When the

Enable RAID spanned over VMD Controllers

item is selected, press

<Enter> and select

to enable this function.

Under Select Disks, press <Enter> and select

for the disks you want to include in the

RAID set.

Summary of Contents for RS720Q-E9-RS8



























































































































































Search results

Summary of Contents for RS720Q-E9-RS8

Reviews:

Related manuals for RS720Q-E9-RS8

Brands by name

Popular brands

Asus RS720Q-E9-RS8, User Manual

Search results

Summary of Contents for RS720Q-E9-RS8

Reviews:

Related manuals for RS720Q-E9-RS8

Brands by name

Popular brands