Asus RS720-E9-RS8 User Manual Download Page 20

Page: 20 / 200

Chapter 1: Product Introduction

1-10

The barebone server does not include a floppy disk drive. Connect a USB floppy disk drive

to any of the USB ports on the front or rear panel if you need to use a floppy disk.

WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

Redundant Power supply

ASUS Z11PP-D24 Server

Board

System fans

SATA/SAS back panel

8 x 2.5”/3.5” storage device

trays

Front panel (hidden)

Asset tag (hidden)

2 x 2.5” storage device trays

A protection film is pre-attached to the front cover before shipping. Please remove the

protection film before turning on the system for proper heat dissipation.

RS720-E9-RS8 (with rear bay model)

Summary of Contents for RS720-E9-RS8









































































































































































































Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands

Asus RS720-E9-RS8, User Manual

Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands