Asus RS720-E9-RS8 User Manual Download Page 105

Page: 105 / 200

ASUS RS720-E9-RS8/RS8-G

4-15

USB 2.0 connector (10-1 pin USB78)

This connector is for USB 2.0 ports. Connect the USB module cable to the connector,

and then install the module to a slot opening at the back of the system chassis. The

USB connectors comply with USB 2.0 specification that supports up to 480 Mbps

connection speed.

Fan power connectors (FANPWR1-3)

These connectors are for the power supply plugs that connects to additional fans. The

power supply plugs are designed to fit these connectors in only one orientation. Find

the proper orientation and push down firmly until the connectors completely fit.

The USB port module is purchased separately.

Summary of Contents for RS720-E9-RS8









































































































































































































Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands

Asus RS720-E9-RS8, User Manual

Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands