Asus RS720-E9-RS8 User Manual Download Page 176

Page: 176 / 200

6-18

Chapter 6: RAID Configuration

6.4 Intel

Virtual Raid on CPU in BIOS

This feature allows you to do CPU RAID functions with Intel

CPU RSTe.

•

Due to chipset behavior, enabling the Intel

RSTe CPU RAID functions requires an

Intel

VROC hardware key module.

•

Refer to section

4.4 Internal connectors

for the location of the VROC_KEY1

connector.

•

The KEY module is purchased separately.

To enter the Intel

Virtual Raid on CPU in BIOS:

Enter the BIOS Setup during POST.

Go to the

Advanced

menu >

CSM Configuration

, then press <Enter> to display the

CSM Configuration menu.

Select the

[Disabled]

option for the CSM Support option in the CSM Configuration

menu.

Refer to Chapter 5 for details on entering and navigating through the BIOS Setup.

Summary of Contents for RS720-E9-RS8









































































































































































































Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands

Asus RS720-E9-RS8, User Manual

Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands