Asus RS720-E9-RS8 User Manual Download Page 109

Page: 109 / 200

ASUS RS720-E9-RS8/RS8-G

4-19

11. Back panel power connectors (8-pin BPPWR1-2)

These connectors are for the power supply plugs that connects to the back panel. The

power supply plugs are designed to fit these connectors in only one orientation. Find

the proper orientation and push down firmly until the connectors completely fit.

12. VGA power connectors (8-pin VGAPWR1-3)

These connectors are for the power supply plugs that connects to the VGA card. The

power supply plugs are designed to fit these connectors in only one orientation. Find

the proper orientation and push down firmly until the connectors completely fit.

DO NOT connect the back panel to these connectors. Doing so may cause system boot

errors and permanent damage to your motherboard or device.

DO NOT connect VGA cards to these connectors. Doing so may cause system boot errors

and permanent damage to your motherboard or device.

Summary of Contents for RS720-E9-RS8









































































































































































































Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands

Asus RS720-E9-RS8, User Manual

Search results

Summary of Contents for RS720-E9-RS8

Reviews:

Related manuals for RS720-E9-RS8

Brands by name

Popular brands