Asus RS300-E8-PS4 User Manual Download Page 39

Page: 39 / 158

2-17

ASUS RS300-E8 Series

2.8

Removable/optional components

You may need to remove previously installed system components when installing

or removing system devices. Or you may need to install the optional components

into the system. This section tells how to remove/install the following components:
1. System fans

2.  ASUS PIKE RAID card (optional)
3.  ASUS ASMB7-iKVM (optional)
4.   SSD cage (optional)

Ensure that the system is turned off before removing any components.

2.8.1

System fans

To uninstall the system fans:
1. Disconnect the system fan cable

from the fan connector on the

motherboard.

2. Lift the fan, then set aside.
3. Repeat steps 1 to 2 to uninstall the

other system fans.

To reinstall the system fans
1. Insert the fan to the fan cage. The

airflow directional arrow on the

fan side should point towards the

system rear panel.

2. Connect the system fan cable to the

fan connector on the motherboard.

Summary of Contents for RS300-E8-PS4































































































































































Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands

Asus RS300-E8-PS4, User Manual

Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands