Asus RS300-E8-PS4 User Manual Download Page 32

Page: 32 / 158

Chapter 2: Hardware setup

2-10

2.4

Hard disk drives

The system supports four hot-swap SATAIII/SAS hard disk drives and two SATAII

hard disk drives. The hard disk drive installed on the drive tray connects to the

motherboard SATA/SAS ports via the SATA/SAS backplane.

3. Take note of the drive tray holes.

Each side has three holes to fit

different types of hard disk drives.

Use two screws on each side to

secure the hard disk drive.

2. Firmly hold the tray lever and pull

the drive tray out of the bay.

spring lock

To install a hot-swap SATA/SAS HDD
1. Release a drive tray by pushing the

spring lock to the right, then pulling

the tray lever outward. The drive

tray ejects slightly after you pull out

the lever.

Summary of Contents for RS300-E8-PS4































































































































































Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands

Asus RS300-E8-PS4, User Manual

Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands