Asus RS300-E8-PS4 User Manual Download Page 114

Page: 114 / 158

6-6

Chapter 6: RAID configuration

6. Use the up/down arrow keys to select the stripe size for the RAID array (for

RAID 0, 10 and 5 only) then press <Enter>. The available stripe size values

range from 4 KB to 128 KB. The following are typical values:

RAID 0: 128KB

RAID 10: 64KB

RAID 5: 64KB

We recommend a lower stripe size for server systems, and a higher stripe size

for multimedia computer systems used mainly for audio and video editing.

7. In the Capacity field item, key in the RAID volume capacity that you want to

use and press <Enter>. The default value indicates the maximum allowed

capacity.

8. Press <Enter> to start creating the RAID volume.
9. From the following warning message, press <Y> to create the RAID volume

and return to the main menu, or press <N> to go back to the CREATE

VOLUME menu

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

Summary of Contents for RS300-E8-PS4































































































































































Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands

Asus RS300-E8-PS4, User Manual

Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands