Asus RS300-E8-PS4 User Manual Download Page 72

Page: 72 / 158

5-2

Chapter 5: BIOS setup

5.1.1

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore

the BIOS file when it fails or gets corrupted during the updating process. You can

update a corrupted BIOS file using a USB flash drive that contains the updated

BIOS file.

Prepare a USB flash drive containing the updated motherboard BIOS before using this

utility.

Recovering the BIOS from a USB flash drive

To recover the BIOS from a USB flash drive:
1. Insert the USB flash drive with the original or updated BIOS file to one USB port

on the system.

2. The utility will automatically recover the BIOS. It resets the system when the

BIOS recovery finished.

DO NOT shut down or reset the system while recovering the BIOS! Doing so would cause

system boot failure!

The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS

website at www.asus.com to download the latest BIOS file.

Save a copy of the original motherboard BIOS file to a bootable USB flash disk drive in case

you need to restore the BIOS in the future. Copy the original motherboard BIOS using the

BUPDATER utility.

5.1

Managing and updating your BIOS

The following utilities allow you to manage and update the motherboard Basic Input/

Output System (BIOS) setup:

ASUS CrashFree BIOS 3

To recover the BIOS using a bootable USB flash disk drive when the BIOS file

fails or gets corrupted.

ASUS EzFlash

Updates the BIOS using a USB flash disk.

BUPDATER

Updates the BIOS in DOS mode using a bootable USB flash disk drive.

Refer to the corresponding sections for details on these utilities.

Summary of Contents for RS300-E8-PS4































































































































































Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands

Asus RS300-E8-PS4, User Manual

Search results

Summary of Contents for RS300-E8-PS4

Reviews:

Related manuals for RS300-E8-PS4

Brands by name

Popular brands