Asus RS300-E10 Series User Manual Download Page 22

Page: 22 / 162

Chapter 2: Hardware Information

2-2

2.1

Chassis cover

Removing the rear cover

Locate and remove the front side screws.

Firmly hold the cover and slide it toward

the rear panel for about half an inch

until it is disengaged from the chassis.

Lift the cover from the chassis.

To reattach the rear cover, reverse step

1 to 4.

Loosen the two thumbscrews on the rear panel to release the rear cover from the

chassis.

Thumbscrews

A protection film is pre-attached to

the system cover before shipping.

Please remove the protection film

before turning on the system for

proper heat dissipation.

Front side screw

Summary of Contents for RS300-E10 Series



































































































































































Search results

Summary of Contents for RS300-E10 Series

Reviews:

Related manuals for RS300-E10 Series

Brands by name

Popular brands

Asus RS300-E10 Series, User Manual

Search results

Summary of Contents for RS300-E10 Series

Reviews:

Related manuals for RS300-E10 Series

Brands by name

Popular brands