Asus RS300-E10 Series User Manual Download Page 72

Page: 72 / 162

Chapter 4: Motherboard Information

4-16

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components.

•

These are not jumpers! DO NOT place jumper caps on the fan connectors!

•

All fans feature the ASUS Smart Fan technology.

CPU, front, and rear fan connectors

(4-pin FRNT_FAN1-4; REAR_FAN1; CPU_FAN1)

The fan connectors support cooling fans. Connect the fan cables to the fan connectors

on the motherboard, ensuring that the black wire of each cable matches the ground pin

of the connector.

Serial port connectors (10-1 pin COM1-2)

These connectors are for the serial COM ports. Connect the serial port module cable

to one of these connectors, then install the module to a slot opening at the back of the

system chassis.

Summary of Contents for RS300-E10 Series



































































































































































Search results

Summary of Contents for RS300-E10 Series

Reviews:

Asus RS300-E10 Series, User Manual, Page: 72 / 162

Search results

Summary of Contents for RS300-E10 Series

Reviews: