Asus RS300-E10 Series User Manual Download Page 108

Page: 108 / 162

5-28

Chapter 5: BIOS Setup

PEG0 Hotplug [Disabled]

Allows you to enable or disable PCI Express Hot Plug.

Configuration options: [Disabled] [Enabled]

PEG 0:1:1

Max Link Speed [Auto]

Allows you to set the Max Link Speed.

Configuration options: [Auto] [Gen1] [Gen2] [Gen3]

PEG1 Slot Power Limit Value [75]

Set the upper limit on power supplied by slot. Use the <+> or <-> to adjust the value.

The values range from 0 to 255.

PEG1 Slot Power Limit Scale [1.0x]

Allows you to select the scale for the Slot Power Limit Value.

Configuration options: [1.0x] [0.1x] [0.01x] [0.001x]

PEG1 Physical Slot Number [2]

Allows you to set the physical slot number attached to this Port. The number has to be

globally unique within the chassis.

Use the <+> or <-> to adjust the value. The values

range from 0 to 8191.

PEG1 Hotplug [Disabled]

Allows you to enable or disable PCI Express Hot Plug.

Configuration options: [Disabled] [Enabled]

PEG 0:1:2

Max Link Speed [Auto]

Allows you to set the Max Link Speed.

Configuration options: [Auto] [Gen1] [Gen2] [Gen3]

PEG2 Slot Power Limit Value [75]

Set the upper limit on power supplied by slot. Use the <+> or <-> to adjust the value.

The values range from 0 to 255.

PEG2 Slot Power Limit Scale [1.0x]

Allows you to select the scale for the Slot Power Limit Value.

Configuration options: [1.0x] [0.1x] [0.01x] [0.001x]

PEG2 Physical Slot Number [3]

Allows you to set the physical slot number attached to this Port. The number has to be

globally unique within the chassis.

Use the <+> or <-> to adjust the value. The values

range from 0 to 8191.

PEG2 Hotplug [Disabled]

Allows you to enable or disable PCI Express Hot Plug.

Configuration options: [Disabled] [Enabled]

Summary of Contents for RS300-E10 Series



































































































































































Search results

Summary of Contents for RS300-E10 Series

Reviews:

Related manuals for RS300-E10 Series

Brands by name

Popular brands

Asus RS300-E10 Series, User Manual

Search results

Summary of Contents for RS300-E10 Series

Reviews:

Related manuals for RS300-E10 Series

Brands by name

Popular brands