Asus RS300-E10 Series User Manual Download Page 75

Page: 75 / 162

ASUS RS300-E10 Series

4-19

•

DO NOT forget to connect the 24-pin and the 8-pin power plugs; otherwise, the system

will not boot up.

•

Use of a power supply unit (PSU) with a higher power output is recommended when

configuring a system with more power-consuming devices. The system may become

unstable or may not boot up if the power is inadequate.

•

This motherboard supports ATX2.0 PSU or later version.

•

Ensure that your PSU can provide at least the minimum power required by your

system.

14. ATX power connectors (24-pin EATXPWR1; 8-pin EATX12V1)

These connectors are for the ATX power supply plugs. The power supply plugs are

designed to fit these connectors in only one orientation. Find the proper orientation and

push down firmly until the connectors completely fit.

Summary of Contents for RS300-E10 Series



































































































































































Search results

Summary of Contents for RS300-E10 Series

Reviews:

Asus RS300-E10 Series, User Manual, Page: 75 / 162

Search results

Summary of Contents for RS300-E10 Series

Reviews: