manualshive.com logo in svg

Asus RS300-E10 Series, User Manual, Page: 41 / 162

Share
Download
Asus RS300-E10 Series User Manual Download Page 41

2-21

ASUS RS300-E10 Series

2.6 

Cable connections

• 

The bundled system cables are pre-connected before shipment. You do not need to 

disconnect these cables unless you will remove pre-installed components to install 

additional devices.

• 

Refer to Chapter 4 for detailed information on the connectors.

Pre-connected system cables

1. 

24-pin ATX power connector (from power supply to motherboard)

2. 

8-pin 12V power connector (from power supply to motherboard)

3. 

System fan connector (from motherboard to system fan)

4. 

USB connector (from motherboard to front I/O board)

5. 

SATA connectors (system default; from motherboard to SATA/SAS backplane)

6. 

System auxiliary panel connector (from motherboard to front I/O board)

7. 

System panel connector (from motherboard to front I/O board)

8. 

Mini-SAS HD connector (from motherboard to SATA/SAS backplane)

9. 

Serial General Purpose Input/Output connectors 

Summary of Contents for RS300-E10 Series



































































































































































Reviews:

No comments