Asus RS300-E10 Series User Manual Download Page 70

Page: 70 / 162

Chapter 4: Motherboard Information

4-14

Hard disk activity LED connector (4-pin HDLED1)

This LED connector is for the storage add-on card cable connected to the SATA or

SAS add-on card. The read or write activities of any device connected to the SATA or

SAS add-on card causes the front panel LED to light up.

USB 2.0 connector (10-1 pin USB1114; 4-pin Type-A USB7)

The 10-1 pin connector allows you to connect a USB 2.0 module for additional USB

2.0 front or rear panel ports. The 4-pin USB (Universal Serial Bus) Type-A port is

available for connecting USB 2.0 devices. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed.

Summary of Contents for RS300-E10 Series



































































































































































Search results

Summary of Contents for RS300-E10 Series

Reviews:

Related manuals for RS300-E10 Series

Brands by name

Popular brands

Asus RS300-E10 Series, User Manual

Search results

Summary of Contents for RS300-E10 Series

Reviews:

Related manuals for RS300-E10 Series

Brands by name

Popular brands