Asus RS300-E10 Series, User Manual, Page: 111 / 162

5-31 ASUS RS300-E10 Series
HD Audio Configuration
HD Audio [Enabled]
Allows you to enable or disable the HD Audio.
Configuration options: [Disabled] [Enabled]
Audio DSP [Disabled]
Allows you to enable or disable the Audio DSP.
Configuration options: [Disabled] [Enabled]
Audio Link Mode [HD Audio Link]
Allows you to select the audio link mode.
Configuration options: [HD Audio Link] [SSP (I2S)] [Soundwire] [Advanced Link Config]
HDA-Link Codec Select [Platform Onboard]
Allows you to select the HDA-Link Codec.
Configuration options: [Platform Onboard] [External Kit]
HD Audio Advanced Configuration
iDisplay Audio Disconnect [Disabled]
Allows you to enable or disable iDisplay Audio Disconnect.
Configuration options: [Disabled] [Enabled]
Codec Sx Wake Capability [Disabled]
Allows you to enable or disable Codec Sx Wake Capability.
Configuration options: [Disabled] [Enabled]
PME Enable [Disabled]
Allows you to enable or disable PME wake of HD Audio controller during
POST.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set the Audio Link Mode to [Soundwire] .
Soundwire Buffer RCOMP Setting [Non-ACT Topology]
This item allows you to select the Soundwire Buffer RCOMP Setting.
Configuration options: [Non-ACT Topology] [ACT Topology]
HD Audio Link Frequency [24 MHz]
Allows you to select the HD Audio Link Frequency.
Configuration options: [6 MHz] [12 MHz] [24 MHz]
iDisplay Audio Link Frequency [96 MHz]
Allows you to select the iDisplay Audio Link Frequency.
Configuration options: [48 MHz] [96 MHz]
iDisplay Audio Link T-Mode [2T Mode]
Allows you to select the iDisplay Audio Link T-Mode.
Configuration options: [1T Mode][2T Mode]