Asus DSL-AC52U User Manual Download

Page: 77 / 129

4.6.4 Network Services Filter

The Network Services Filter blocks LAN to WAN packet exchanges

and restricts network clients from accessing specific web services

such as Telnet or FTP.

To set up a Network Service filter:

1. From the navigation panel, go to

Advanced Settings

Firewall

Network Service Filter

tab.

2. On the Enable Network Services Filter field, select

Yes

3. Select the Filter table type.

Black List

blocks the specified

network services.

White List

limits access to only the specified

network services.

4. Specify the day and time when the filters will be active.
5. To specify a Network Service to filter, enter the Source IP,

Destination IP, Port Range, and Protocol. Click the

button.

6. Click

Apply

Summary of Contents for DSL-AC52U


































































































































Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands

Asus DSL-AC52U, User Manual

Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands