Asus DSL-AC52U User Manual Download

Page: 33 / 129

3.5 Using the USB Application

The USB Applications function provides AiDisk, Servers Center,

Media Server, Network Printer Server, and Download Master

submenus.

IMPORTANT!

To use the server functions, you need to insert a USB

storage device, such as a USB hard disk or USB flash drive, in the USB 2.0

port on the rear panel of your xDSL modem router. Ensure that the USB

storage device is formatted and partitioned properly. Refer to the ASUS

website at http://event.asus.com/2009/networks/disksupport/ for the

file system support table.

3.5.1 Using AiDisk

AiDisk allows you to share files stored on a connected USB device

through the Internet. AiDisk also assists you with setting up ASUS

DDNS and an FTP server.

To use AiDisk:

1. From the navigation panel, go to

General

USB application

then click the

AiDisk

icon.

2. From the Welcome to AiDisk wizard screen, click

Summary of Contents for DSL-AC52U


































































































































Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands

Asus DSL-AC52U, User Manual

Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands