Asus DSL-AC52U User Manual Download

Page: 87 / 129

5.2 Firmware Restoration

Firmware Restoration is used on an ASUS Wireless xDSL Modem

Router that failed during its firmware upgrading process. It

uploads the firmware that you specify. The process takes about

three to four minutes.

IMPORTANT:

Launch the rescue mode on the router before using the

Firmware Restoration utility.

NOTE:

This feature is not supported on MAC OS.

To launch the rescue mode and use the Firmware Restoration

utility:

1. Unplug the xDSL modem router from the power source.
2. Hold the Reset button at the rear panel and simultaneously

replug the xDSL modem router into the power source. Release

the Reset button when the Power LED at the front panel

flashes slowly, which indicates that the xDSL modem router is

in the rescue mode.

Summary of Contents for DSL-AC52U


































































































































Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands

Asus DSL-AC52U, User Manual

Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands