Asus DSL-AC52U User Manual Download

Page: 115 / 129

115

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003

and RSS-210.
Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired

operation of the device.

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below

the Industry Canada (IC) radio frequency exposure limits. The

ASUS Wireless Device should be used in such a manner such

that the potential for human contact during normal operation is

minimized.
This device has been evaluated for and shown compliant with

the IC Specific Absorption Rate (“SAR”) limits when installed in

specific host products operated in portable exposure conditions

(antennas are less than 20 centimeters of a person’s body).
This device has been certified for use in Canada. Status of the

listing in the Industry Canada’s REL (Radio Equipment List) can be

found at the following web address: http://www.ic.gc.ca/app/sitt/

reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be

found at the following web: http://www.ic.gc.ca/eic/site/smt-gst.

nsf/eng/sf08792.html

Canada, avis d’Industry Canada (IC)

Cet appareil numérique de classe B est conforme aux normes

Summary of Contents for DSL-AC52U


































































































































Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands

Asus DSL-AC52U, User Manual

Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands