background image

122

 

Therefore, by modifying or distributing the Program (or any 

work based on the Program), you indicate your acceptance 

of this License to do so, and all its terms and conditions for 

copying, distributing or modifying the Program or works 

based on it.

6.  Each time you redistribute the Program (or any work based 

on the Program), the recipient automatically receives a license 

from the original licensor to copy, distribute or modify the 

Program subject to these terms and conditions. You may not 

impose any further restrictions on the recipients’ exercise 

of the rights granted herein. You are not responsible for 

enforcing compliance by third parties to this License.

7.  If, as a consequence of a court judgment or allegation of 

patent infringement or for any other reason (not limited to 

patent issues), conditions are imposed on you (whether by 

court order, agreement or otherwise) that contradict the 

conditions of this License, they do not excuse you from the 

conditions of this License. If you cannot distribute so as to 

satisfy simultaneously your obligations under this License and 

any other pertinent obligations, then as a consequence you 

may not distribute the Program at all. For example, if a patent 

license would not permit royalty-free redistribution of the 

Program by all those who receive copies directly or indirectly 

through you, then the only way you could satisfy both it and 

this License would be to refrain entirely from distribution of 

the Program.

 

If any portion of this section is held invalid or unenforceable 

under any particular circumstance, the balance of the section 

is intended to apply and the section as a whole is intended to 

apply in other circumstances.

 

It is not the purpose of this section to induce you to infringe 

any patents or other property right claims or to contest 

validity of any such claims; this section has the sole purpose 

of protecting the integrity of the free software distribution 

system, which is implemented by public license practices. 

Many people have made generous contributions to the wide 

Summary of Contents for DSL-AC52U


































































































































Reviews: