Asus DSL-AC52U User Manual Download

Page: 107 / 129

107

• Check the status indicators on the ADSL modem and the xDSL

modem router. If the WAN LED on the xDSL modem router is

not ON, check if all cables are plugged properly.

You forgot the SSID (network name) or network password

• Setup a new SSID and encryption key via a wired connection

(Ethernet cable). Launch the web GUI, go to

Network Map

click the router icon, enter a new SSID and encryption key,

and then click

Apply

• Reset your router to the default settings. Launch the web GUI,

go to

Administration

Restore/Save/Upload Setting

, and

click

Restore

. The default login account and password are

both “admin”.

How to restore the system to its default settings?

• Go to

Administration

Restore/Save/Upload Setting

, and

click

Restore

The following are the factory default settings:

User Name:

admin

Password:

admin

Enable DHCP:

Yes (if WAN cable is plugged in)

IP address:

192.168.1.1

Domain Name:

(Blank)

Subnet Mask:

255.255.255.0

DNS Server 1:

192.168.1.1

DNS Server 2:

(Blank)

SSID (2.4GHz):

ASUS

SSID (5GHz):

ASUS_5G

Firmware upgrade failed.

Launch the rescue mode and run the Firmware Restoration utility.

Refer to section

5.2 Firmware Restoration

on how to use the

Firmware Restoration utility.

Summary of Contents for DSL-AC52U


































































































































Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands

Asus DSL-AC52U, User Manual

Search results

Summary of Contents for DSL-AC52U

Reviews:

Related manuals for DSL-AC52U

Brands by name

Popular brands