57
4.2.2 DHCP Server
Your xDSL modem router uses DHCP to assign IP addresses
automatically on your network. You can specify the IP address
range and lease time for the clients on your network.
To configure the DHCP server:
1. From the navigation panel, go to
Advanced Settings
>
LAN
>
DHCP Server
tab.
2. In the
Enable the DHCP Server
field, tick
Yes
.
3. In the
IP Pool Starting Address
field, key in the starting IP
address.
4. In the
IP Pool Ending Address
field, key in the ending IP
address.
5. In the
Lease Time
field, specify in seconds when an assigned
IP address will expire. Once it reaches this time limit, the DHCP
server will then assign a new IP address.
