1 947541
ISSUE 1
VIP-814B
QUAD NETWORK STATION PORT
INTRODUCTION
The VIP-814B Quad Network Station Port allows
most loop start terminal devices to be connected
to a managed IP-based LAN/WAN.
SPECIFICATIONS
Access Methods
PBX, FXO Port
POTS telephone set
Features
RJ-45 for network connection
4 RJ-11 telephone connections
4 Relays with Form C contacts
Generates Caller ID Signals
Front panel Status/Link/Activity LEDs
2 RENS
2.5mm jack for external power (optional)
Power over Ethernet (PoE) 802.3af
compatible
Dimensions/Weight
1.72 H x 7.00" W x 11.875" D
(4.36cm H x 17.78cm W x 30.16cm D)
Weight: 2.11 lbs. (0.95 kg)
Nominal Specifications
Input Impedance:
600 Ohms
Input Level:
-10dBm
Output Impedance:
600 Ohms
Output Level:
- 10dBm nominal
Relay Current:
1 AMP @ 24VDC
Nominal Power Requirements
Via rear panel barrel connector:
Voltage:
24VDC
Current:
325mA
Via 802.3af (PoE) Ethernet Switch:
802.3af:
Class 3
Environment
Temperature:
0 to +40° C
Humidity:
0 to 85% non-precipitating
WARNING:
To Reduce The Risk Of Fire Or Electric Shock
Do Not Expose This Apparatus To Rain Or
Moisture.
AVERTISSEMENT : Afin de réduire les risques
d'incendie ou de décharge électrique, évitez
d'exposer le système à la pluie ou à
l'humidité.
INSTALLATION
NOTE: The telephone system referred to in
this manual is the customer premise
equipment such as an electronic key system,
a PBX or a dedicated single line telephone
sets. The VIP-814B is not intended for direct
or indirect connection to the public telephone
network. When used with a customer premise
telephone system such as a key system or
PBX system, these units are interfaced to the
system via a fully protected system central
office port, which is a fully protected interface
device. Also, the host system must be
configured to disallow central office trunk
conferencing in order to prevent indirect
connection to the public network.
