Operation menus
T3-OPX User Guide
62
Print queue
Print jobs are queued progressively as they are sent and processed in a FIFO (first in first out)
system. The queue can be managed from the Print queue menu.
The currently printed job in the queue cannot be deleted, this must be stopped from the
Overview
Menu.
•
While print queue is paused, the print jobs are pending in the queue and printing only
starts when the queue is resumed.
•
The current print queue status (if running or paused) is also displayed always at the right
side status bar.
•
The number in parenthesis indicates the number of print jobs pending in the print queue.
Media settings overview
The
Media settings
menu point is the key for printing, and a profile must be actively set before
printing a job. The media settings controls the print height and where the artwork is placed on
the media relative to the detected edge of the media.
Icon
Description
Queue is paused, press to resume.
Queue is running, press to pause. Note this
does not pause the currently printed job.
Information from selected print job.
Deleting the selected print job.
Summary of Contents for TrojanLabel T3-OPX
Page 1: ...U S E R G U I D E...
