General settings (HOME tab)
T3-OPX User Guide
44
Shutdown
•
Shuts down the T3-OPX completely.
When shutting down the unit it is advised to wait with turning the power switch off until
the shutdown process is finished. There is a message on the display when the shutdown
process is initiated to indicate that the shutdown process is still going on.
When shutdown process is finished (the screen turns blank) it is advised to turn the phys-
ical power switch off. The power switch is located at the back of the T3-OPX press.
Caution:
Always wait until the shutdown process finishes before shutting down the power
supply! Otherwise the Maintenance Module inside the machine might end up in the wrong
position and cannot protect the printhead from dehydration. Dehydration of nozzles in the
printhead may result in print quality defects. Shutdown process may take 1-2 minutes.
Exporting statistics data to a CSV file / viewing statistics
from a browser
Statistics data from
HOME > Statistics
menu can be exported and saved into a CSV file from
a user PC which is connected to the same network as the T3-OPX.
•
Actual IP address of the T3-OPX can be set or acquired from
HOME > Settings >
Network
menu.
Note:
The IP address shown above is an example only. The actual IP address is local
network dependent.
Summary of Contents for TrojanLabel T3-OPX
Page 1: ...U S E R G U I D E...
