T3-OPX User Guide
52
6
Printing a job from the Job
Library
The two most common menus that the operator will use when printing jobs:
Job Library and Media Settings.
See “Media settings overview” on page 62.
Note:
All jobs are centered by default. Use the RIP to move the print or position the media
accordingly.
1.
Select or create the
media profile
in menu: media settings.
calibrating the job/media height” on page 67.
This will ensure that the job has the correct print height relative to the media and edge
sensor is set.
2.
Place the media to print on the
feeding side
(see above) of the print unit.
3.
Go to the
Job Library
.
4.
Select the print job (indicated by a red square).
#
Description
1
Feeding side
2
Print unit
3
Exit side
Summary of Contents for TrojanLabel T3-OPX
Page 1: ...U S E R G U I D E...
