SECTION 2
INSTALLING THE PRINTER
7
Install the Inkjet Cartridges
Standard Cartridge Installation
The AstroJet 3600P can be configured with six Inkjet Cartridges and the AstroJet 3800P can be configured with
eight Inkjet Cartridges. Install standard Cartridges as follows:
1.
Remove the Inkjet Cartridge from its packaging, taking care not to touch
the copper contacts, the metal plate, or the gold printhead. Remove the
protective tape from the Printhead.
2.
The Cartridges are held in place by a Latch Lever mounted on the Inkjet
Cartridge Holder. Release the Lever by raising it vertically.
3.
With the Cartridge’s Printhead pointing down, slide the Cartridge into the
Holder and push down and toward the contacts in the Holder.
4.
Make sure the Cartridge is seated in the Holder then close the Latch Lever
to secure the Cartridge in the Holder. Do not force the Lever into place.
(
See diagram
.)
5.
Repeat the above for the remaining Cartridges.
NOTE: For optimum image quality during the run, refer to
"Cleaning
the Printhead"
on page 39.
The ink in the cartridge may be harmful if
swallowed. Keep new and used cartridges
out of reach of children. Discard empty
cartridges immediately.
Summary of Contents for 3600P? 3800P
Page 4: ...TABLE OF CONTENTS ii Notes...
Page 8: ...SECTION 1 GETTING ACQUAINTED 4 Notes...
Page 33: ......