16
8. Cleaning and Maintenance
When inspecting or cleaning the unit, always switch the power “Off”
and unplug the power cord from the wall outlet.
Failure to do this may result in injury.
Warning!
1) When using the unit be sure to carry out the following on a daily basis.
1. Check for unusual noise.
2. Ensure that the unit does not become abnormally hot.
2) Remove the laser liner. (Only for KA-750, sold separately)
• Set the power switch on the laser liner to “OFF,” and then remove the laser liner from the unit.
(The ON/OFF switch of the laser liner is located on the right side of the unit.)
Caution!
The laser liner is not waterproof. Be sure to remove the laser liner prior
to cleaning the peeler. Failure to do so may result damage to the unit.
3) Keep the unit clean.
• Rinse off dirt from the upper portion of the unit. Never spray the base. Wipe the unit with a cloth
that has been immersed in water and then wrung hard. Never use thinners or petroleum-based
cleaning fluids on the unit.
The base of the unit is NOT water resistant. Do not pour water directly
on the base, or immerse the unit. Failure to prevent water from com-
ing into contact with the base may result in an electrical shock, fire,
or other damage.
Warning!
• Periodically clean the holding prong(s), slider, ejector, peeler blade(s), peeler arm, and spring. You
can remove the parts and immerse it for washing. Please clean the unit and all parts more than
once a day when in regular use.
The holding prong(s) and peeler blade(s) are extremely sharp.
Take adequate precautions to avoid injury to the hands, etc.
Warning!
Summary of Contents for Peel-a-ton KA-720
Page 23: ...22 MEMO ...
