14
5) Peeler blade
• When replacing the peeler blade it is easiest to first remove the arm from the unit.
The peeler blades are extremely sharp. Handle with care to
avoid injuring your hands.
Warning!
Peeler replacement procedure
Open the arms in the shape of a "C" and remove the
hinges at both ends of the peeler.
Do not open the arm too far or it will be deformed
and the peeler will come off.
If it is deformed inwardly, the blade will not hit the
material properly.
Please bend it back if deformed.
• Install the peeler blade using the reverse procedure to removal, while paying attention to the orien
-
tation of the blade (up-down, front-rear).
6) The Spring
• You can remove the spring and immerse it for washing. It is best to remove the arm first.
Clip
Spring holder
When attaching new spring
Spring holder
First remove the clip by pulling, then the
spring holder can be removed.
It is very difficult to remove when there is
fruit juice attached to it.
To replace the spring, use a Phillips screw
-
driver to remove it from the holder.
• Align the nipple on the inside of the spring holder with the corresponding part of the arm holder,
and then install the arm holder. Firmly insert the clip to the rear.
Protruding
part of screw
Concave part of shaft
Summary of Contents for Peel-a-ton KA-720
Page 23: ...22 MEMO ...
