8
3) Adjusting the laser liner (For KA-750 only, sold separately)
• Adjust the angle of the laser liner so that the laser beam is in line with the center of the drive shaft
axle on which the holding prong is mounted.
• Power of the laser liner is not linked to the unit. Please turn on and off individually.
Laser beam
Align the laser beam with the center of
the drive shaft axle of the holding prong.
Slacken the screw, and adjust the direction
in which the laser beam is emitted.
Drive shaft axle of holding prong
Caution!
If the laser beam is not correctly adjusted, it is likely that parts of
the item may remain unpeeled or the holding prong will be bent.
Never peer through the light emission port of the laser while it
is emitting a laser beam. Failure to do this may result in injury
to your eyes or other part of your body.
Warning!
Summary of Contents for Peel-a-ton KA-720
Page 23: ...22 MEMO ...
